Disclosure: This project was completed as part of my partnership with Command Brand. However, all opinions and ideas are my own. Hello friends, I hope this day finds you well and the sun shining. And if it is not shining, I hope you are at least smiling. I am smiling as I write this post because this little spot in my kitchen is so me – and I love how it came out. And it all started with a DIY tea towel that lead to a little bit of kitchen decorating.This space before was just boring. I always wanted to hang something here, but I didn’t want to damage the cabinet. I did not want to put in a hole – especially since I tend to change my mind quite a bit. Once there is a hole in a cabinet – that is pretty permanent.

Before

Then I came up with the idea to work with products from Command Brand. I knew that would give me a solution for damage-free DIY. And now…

After

And this is a pretty easy project that you can do also. Here are the steps.

Step One

Decide on your image and print it out on regular paper first and determine the size of your images and the layout.

Step Two
Iron your towel. Spray it with a little bit of water to help get the folds out of the towel.

Step Three

Once you are comfortable with the size of the image, print it onto photo transfer paper. Then, cut them out carefully and follow the transfer instructions on the packaging to apply them to the towel.

Step Four
After the images are transferred, fold a straight edge at the bottom of the towel and iron it flat. Then, take the wooden dowel and use a hot glue gun to secure it to the bottom of the towel to act as a lightweight to keep it in place. ( Always follow the instructions and warnings provided by the glue gun manufacturer.)

Step Five

Determine where you want to hang the towel. Use a level and measuring tape to ensure straight lines and mark them using ScotchBlue™ Painter's Tape. Prep the wall or cabinet by cleaning the surface with isopropyl rubbing alcohol, wipe gently and let dry.

Step Six

Remove the Command™ Clear Fridge Clips and adhesive strips from the packaging, and detach the strips from one another. To attach the first clip, remove the blue liner and press the adhesive to the clip, making sure the tab is accessible for future removal. Remove black "wall side" liner and press the clip firmly to the wall for 30 seconds, using the painter's tape as your guide. Do not adhere the clip to the tape, and remember to wait one hour before use. Repeat for each of the three clips. Remove the painters tape.

Step Seven

When you are ready to hang the towel, slide the top into the Command™ Clear Fridge Clips.

Step Eight
Plan the decorating around your towel. I used a vintage bread board and chalkboard. I used Command Brand Picture Hanging Strips. To hang the first piece, prep the area by cleaning the surface with isopropyl rubbing alcohol, wipe gently and let dry. Remove the Command™ Brand Picture Hanging Strips from the package and separate each strip. To form a set, connect two strips together until you hear a click. Remove one green liner and position one set of strips on the back of the frame. Press the strip firmly against the back. Repeat with the remaining strips needed to hang the board. Remove the remaining green liner(s) from the strips adhered to the back of the frame. Position the frame on the wall and press the front of the frame against the wall for 30 seconds. Remove the board by grabbing at the bottom corners and pulling up and out towards you and wait one hour before remounting the board. Repeat each of the series of steps for each piece you are hanging.

And there you have it.

Oh, and once I had it all in place, I decided it really needed a small table under it. You can find the tutorial for my console table here.

Now, the previously plain area brings some warmth and character to our white farmhouse kitchen. Kitchen-Decorating Thanks so much for reading and wishing you a great day. postsignature.png Disclosure: This project was completed as part of my partnership with Command Brand. However, all opinions and ideas are my own.