Easy DIY Outdoor Fall Sign (really, it is super easy!)
¬†This post is sponsored by 3M, however all opinions are my own.
As fall comes in, I am hanging on like crazy to keep spending time outside.¬† So, I thought I would bring a little fall touch to screened porch with an easy DIY outdoor fall sign.¬† And when I say easy, it really is.¬† If you can trace a line - you can do this!
I have had this old cabinet door, bought at a yard sale, for a million years.¬† It was $5 and I knew as soon as I saw it, it would be perfect to create a sign.
To get started, I went all pulled out my
So here is how I did it:
Step 1:I painted out the whole thing in Annie Sloan Chalk Paint in Paris Grey.¬† I let it dry several hours.¬† Then using my 3M‚Ñ¢ Safe-Release‚Ñ¢ Painter's Tape, I taped out the edges of where I wanted to fill in another color.¬†¬† Once it was in place, I went back the edge several times with my thumb to make sure it was sealed fully.
Step 2:Paint in the channel between the tape lines.¬† I used Annie Sloan Chalk Paint in Versailles.
Step 3:As soon as you are finished painting, I removed the tape.
Step 4:Then I went to my printer and printed out the word welcome.¬† I used Halo Handletter font in size 819 because that fit the paper horizontally and filled in the space.¬† I created mine in Photoshop Elements, however, with a little trial and error for size, this could easily be done in a Word document.¬† I simply taped the pieces of paper together with the letters lined up.
Step 5:Turning the paper over, I colored the back of the letter with pencil.
Step 6:Place the paper in place and use 3M‚Ñ¢ Safe-Release‚Ñ¢ Painter's Tape to hold the paper in place.¬† Then trace the outline of the letters with pencil.
Step 7:Remove the paper and you will now see pencil marks where the outline of your letters are.¬† This is the same technique I used when I created my Sharpie art coffee table.
Step 8:Using craft paint and a small paint brush, fill in the lines.
Step 9:I chose to also tape out and paint an additional border while the paint dried.
Step 10:Using a darker color, add shadows to your letters on the right and underside of each letter.
Step 11:I took the sign outside at this point and knocked all the paint down with sand paper and removed all the dust.
Step 12:I then added a coat of Annie Sloan Dark Wax.
Step 13:I wiped it back so it wasn‚Äôt too dark and then added a final coat of Annie Sloan clear wax.¬† This gave it a final seal and also took back some of the darkness.¬† By doing it in these steps, it creates move of a ‚Äúlayered‚Äù and vintage look.¬† If it is going to be used in direct sun, you will probably want to seal it with a clear sealer so the wax does not melt.
Here is a close-up look of the finish after all of the steps.¬†
Don‚Äôt be intimidated to make your own sign with your own words or even images / pictures.¬† If you can trace! you can do this!
And of course, having the right tools makes all of the difference.¬† Using the 3M‚Ñ¢ Safe-Release‚Ñ¢ Painter's Tape allowed me to quickly and easily form clean paint lines and details without damaging the painted surfaces.
You can follow along with 3M for ideas on other projects here:
Thanks so much for reading and have a great day!